This leading edge hydraulic double-acting hammer from world-class supplier LASCO is an ideal forming machine for the forging industry. This project included a LASCO Forging Hammer HO-U 315 and it’s full equipment line. During this project we dismantled and relocated the Hammer from Germany to our customer in Slovenia.

1. Hammer rack
2. Drive head
3. Hammer bear
4. Electrical cabinet
5. Electrical control panel
6. Equipments pallet
7. Induction heater
8. Transfer station
9. Bar feeder/Elevator
10. Small equipment pallets

Rated working capacity: approx. 40/50 kJ (interchangeable by SoftSwitch)
Impact frequency at nominal work capacity: approx. 90 1/min
Ultimate bear speed: at 40kJ= approx. 4.8 m/s and at 50kJ= approx. 5.3 m/s

Bear Stroke
max.: approx. 710 mm
min.: approx. 500 mm
Bear weight: about 3000 kg
Bear depth: approx. 700 mm

Height of both dies with swallows
max.: approx. 430 mm
min.: approx. 220 mm
Clear width between the guides: approx. 700mm
Frame foot dimensions (WxD): approx. 2800 mm x 1400 mm
Overall height: approx. 5100 mm
Frame weight: approx. 55000 kg
Total weight of the hammer: 75000 kg
Amount of oil in the head tank: approx. 1800 l
Accumulator pressure: approx. 130 bar
Drive power main engine: 2 x 45 kW
Drive power cooling filter circuit: 2.2 kW
Drive power fan for air cooler: 0.55 kW
Lubrication pump drive power: 0.18 kW
Operating voltage: 400 V³ 50 Hz
Control voltage: 230 V³ 50 Hz
Valve voltage: 24 V –
Degree of protection / type of protection: IP 55
Screen: Colour
Screen diagonal: 10.4″

Induction furnace
Screen diagonal: 10.4″
Operating voltage 600 volts three-phase current, 50 Hz
Peak current 1120 A
Power 1000 KW
Cooling circuit inductor with energy-saving cooler, closed circuit
Cooling circuit converter with chiller, closed circuit